Tag Archives: bannister

Pushing Through with the Banister

A quick note: It’s been an exhausting couple of weeks. I should have published this about 2 weeks ago on April 8. I present it to you now as if I had.

It’s been a tedious month. We left off with the banister and the paneling below looking more or less like this.

IMG_0717

The sequence was burn paint off, sand, wood filler, sand, prime, then see everything I missed (and the grain that the primer raised), wood filler again, sand again, prime again, rinse, repeat.  And because I was getting so fed up with this job, I did what any sane person would do and squeezed in the upstairs banister. I was going to focus on the downstairs part and let this go till later. But the job was so bad I thought getting it all done now made more sense.

IMG_0743

So the dirty part was going on upstairs while my OCD got free reign downstairs.

wood filler.jpg

This work might seem pretty sedate compared to Phase 1, but I’ve also done it on top of working out 5 times a week and cooking myself heaps of meat and vegetables so I stop wanting bread. You see, I’m 30 now and to my great horror, my waistline has grown enough that for the first time in my adult life I’m wearing a pants size that American stores keep in stock.

And today I have a couple dear old high school friends coming for dinner, which was a bit of a problem because I was still working on the banister yesterday and I haven’t done a lick of house cleaning in a month. I just let the place look like this, plus a continuous accumulation of dust and clutter.

Dropcloths.jpg

And so, my parents came down yesterday. My dad and I got another round of priming done and my mom cleaned the house. Maybe I should be ashamed that I let that happen but it was her way of helping. So where are we now? Well, just about all of it is primed (except for some difficult spots where the 2 banisters overlap). In this critical corner, there is no sign left of the hatchet job someone did moving the basement stairway door. The paneling has its sticking in place and the sticking matches the door perfectly. The only thing missing is the little piece of ogee trim under the cap above the door. With a compound miter cut that the Irishman said was not easy to do.

IMG_0742.JPG

Upstairs I have a little bit more priming to do and then, sadly, there is more sanding to do there. And there are 8 balusters missing from around the volute downstairs, but I don’t want to install those until everything else is painted. Seriously, I don’t know how anyone would fit their hand in there except that they did a really terrible job painting this.

P1010256

Stairs

But anyways, I’m ready for a break again. And the house is spotless, so keeping it that way for a while would be a nice thing to do instead of messy, tedious projects.

Or, maybe not. On the morning of the 8th, a few hours before my company’s supposed to show up, there’s a crazy person cutting high density fiberboard on my sidewalk! Can you guess why?

IMG_0740

 

Advertisements

Progress and Increasingly Delicate Sensibilities

My dad came today and we got the lower part of the stairway wall primed!

IMG_0717.JPG

Old house purists: before you bite my head off for painting my woodwork, the first floor interior is a Colonial Revival style remodel from the 1930’s and had always been painted. But getting it back to this point seemed insurmountable. Especially these scrolly things under the stair nosings. There was so much paint glooped up onto them that I used 3 different types of chemical stripper, then burned it off with a heat gun, and finally gave up and used sandpaper. I then primed it, which exposed more flaws, so I sanded it all again and primed it a second time. It looks pretty good now!

IMG_0719.JPG

There are still imperfections to fix, including all the little nail holes in the paneling. But the paneling all needs to be sanded as the paint raises the grain of the plywood it’s made out of.

Once this is done, there’s another round of it upstairs. I didn’t do it all at once because (1) there is only so much prep I can stand to do in one go and (2) I wanted to get the downstairs painted before reinstalling the top 2 stair nosings, and then I have to close up the unfinished underside of the upstairs box newel.IMG_0724.JPG

And I’ll be replacing the 8 bottom balusters in the second phase after getting everything painted that they’ll block. (No, not restoring. It’s not worth the trouble for paint grade pine.)

P1010308

But my sensibilities are getting delicate. I can no longer handle this bit of unpainted trim on the ceiling that was supposed to happen later with the upstairs banister. It’s now getting moved up into this phase.

IMG_0715.JPG

What is happening to me that this is bothering me? Remember when I was sleeping in the kitchen? That was totally fine.

P1040496

And then this project is about to collide with the Phase 2 kitchen cabinet fronts thanks to another flaw my delicate sensibilities can’t handle. The casings around the big opening between the living room and kitchen is just tacked up so it can be notched into the cabinet fronts later. But this is affecting the living room now because I’ve decided that the little strip of molding on the left side of the door opening is too skinny.

IMG_0716

You see, I opened the wall, but emphatically wanted it to look like the wall was still there, just with a big doorway in it. I think that completely open rowhouses can feel relentlessly long and narrow and liked the proportions of this room as it was at the beginning. And right now this skinny rip of trim doesn’t feel like enough to hold up the corner of the room. It feels more like an outside corner than a wall. It will also balance better with the window on the other side.

img_0637

So, I’ll be yanking off that that piece of casing that had been ripped down, pulling off everything that had been tacked in place on the kitchen side, facing the cabinets, installing a new wooden board over the old one to make the doorway like an inch narrower, and putting up a new, heftier rip of trim on the living room side. Luckily, this isn’t the expensive special order casing, though I will, sigh, be needing more of that later, too.

So, does this sound like a good idea to you, or do you think I need to be medicated? My thoroughly practical dad flinched, but then took a second look and said, “You know it really will look better if you come out about one and a quarter and cover up the side of the refrigerator.”